• Connecting DC Power to an EX8200 Switch
• Connecting DC Power to an EX9204 Switch
• Connecting DC Power to an EX9208 Switch on page 183
• Connecting DC Power to an EX9214 Switch
• Connecting AC Power to an XRE200 External Routing Engine
• Connecting DC Power to an XRE200 External Routing Engine
• Connecting AC Power to an OCX1100 Switch
• Connecting DC Power to an OCX1100 Switch
• Connecting AC Power to a QFX3100 Director Device
• Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays
• Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Delta Wiring
Trays
• Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Wye Wiring
Trays
• Connecting AC Power to a QFX3500, QFX3600, or QFX3600-I Device
• Connecting DC Power to a QFX3500, QFX3600, or QFX3600-I Device
• Connecting AC Power to a QFX5100 Device
• Connecting DC Power to a QFX5100 Device
• Connecting AC Power to a QFX5200
• Connecting DC Power to a QFX5200
• Connecting AC Power to a QFX10002
• Connecting DC Power to a QFX10002
• Connecting AC Power to a QFX10000
• Connecting DC Power to a QFX10000
• Connecting AC Power to an NFX250 Device
Chassis Lifting Guidelines
•
Before moving the device to a site, ensure that the site meets the power, environmental,
and clearance requirements.
•
Before lifting or moving the device, disconnect all external cables and wires.
•
As when lifting any heavy object, ensure that most of the weight is borne by your legs
rather than your back. Keep your knees bent and your back relatively straight. Do not
twist your body as you lift. Balance the load evenly and be sure that your footing is firm.
327Copyright © 2017, Juniper Networks, Inc.
Chapter 32: Installation Safety Guidelines and Warnings
To Next Page
Loading...
