Juniper EX9208 - Chapter 5 Line Cards; Line Cards; Line Card Model and Version Compatibility in an EX9200 Switch

CHAPTER 5
Line Cards
•
Line Card Model and Version Compatibility in an EX9200 Switch on page 51
•
EX9200-2C-8XS Line Card on page 53
•
EX9200-4QS Line Card on page 55
•
EX9200-6QS Line Card on page 56
•
EX9200-MPC Line Card on page 58
•
EX9200-12QS Line Card on page 62
•
EX9200-32XS Line Card on page 64
•
EX9200-40T Line Card on page 65
•
EX9200-40F Line Card on page 67
•
EX9200-40F-M Line Card on page 68
•
EX9200-40XS Line Card on page 70
•
Line Card LED in an EX9200 Switch on page 71
•
Configuring Rate Selectability on an EX9200-12QS Line Card to Enable Different Port
Speeds on page 72
Line Card Model and Version Compatibility in an EX9200 Switch
NOTE: If you are installing line cards released after Junos OS Release 14.1,
ensure that the Switch Fabric module (SF module) EX9200-SF2 is installed
in the switch chassis.
Table 23 on page 52 shows the model numbers, description of the line card, the Junos OS
release in which the line card was first supported and the Switch Fabric module (SF
module) that must be installed in the switch to support each line card.
51Copyright © 2017, Juniper Networks, Inc.