Table 64: Accessory Box Parts List (continued)
QuantityPart
1RJ-45-to-DB-9 cable to connect the switch through the
serial port
2Cable management brackets
2Terminal block plug, 3-pole, 5.08 mm spacing, 12A, to
connect the alarms
1Label, accessories contents, EX9208
1Read me first document
1Affidavit for T1 connection
1Juniper Networks Product Warranty
1End User License Agreement
1Document sleeve
23 in. x 5 in. pink bag
29 in. x 12 in. pink bag, ESD
1Accessory Box, 19 in. x 12 in. x 3 in.
1Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP,
Category 5E, 15'
1ESD wrist strap with cable
Related
Documentation
Unpacking the EX9200 Switch on page 155•
• EX9208 Switch Hardware Overview on page 3
Registering Products—Mandatory for Validating SLAs
Register all new Juniper Networks hardware products and changes to an existing installed
product using the Juniper Networks website to activate your hardware replacement
service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website
and update the installation base data if there is any addition or change to
the installation base or if the installation base is moved. Juniper Networks
will not be held accountable for not meeting the hardware replacement
159Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Unpacking the Switch
To Next Page
Loading...
Need help?
General
