Juniper EX9208 Hardware Guide

Table 23: Line Card Models for EX9200 Switches
SF Module
Required
First Junos OS
ReleaseDescriptionModel number
EX9200-SF or
EX9200-SF2
13.2R1A line card with two 100-Gigabit
Ethernet ports and eight
10-Gigabit Ethernet ports
See “EX9200-2C-8XS Line
Card” on page 53
EX9200-2C-8XS
EX9200-SF or
EX9200-SF2
12.3R2A line card with four 40-Gigabit
Ethernet ports
See “EX9200-4QS Line Card”
on page 55
EX9200-4QS
EX9200-SF or
EX9200-SF2
14.2R1
CAUTION: Junos OS
Release 14.2R1
supports the
EX9200-6QS line
card except for one
specific
configuration. See
the Junos OS
14.2R2 Release
Notes for Known
Issue PR1068396 to
determine whether
that configuration
applies to your
switch and which
release to use if the
configuration
applies.
A line card with six 40-Gigabit
Ethernet ports and 24
10-Gigabit Ethernet ports
See “EX9200-6QS Line Card”
on page 56
EX9200-6QS
EX9200-SF or
EX9200-SF2
15.1R3A modular line card that
accepts any of the following
MICs:
•
EX9200-10XS-MIC
•
EX9200-20F-MIC
•
EX9200-40T-MIC
See “EX9200-MPC Line Card”
on page 58
EX9200-MPC
EX9200-SF216.1R1A line card with six 40-Gigabit
Ethernet rate-selectable ports,
each of which can house
transceivers
See “EX9200-12QS Line Card”
on page 62
EX9200-12QS
Copyright © 2017, Juniper Networks, Inc.52
EX9208 Switch Hardware Guide

Juniper EX9208 Specifications

General

Brand	Juniper
Model	EX9208
Category	Switch
Language	English