Juniper EX9208 Hardware Guide

Table 69: Chassis Component Alarm Conditions on EX9200
Switches (continued)
Remedy
Alarm
SeverityAlarm Condition
Chassis
Component
•
Check the interface cable
connection.
•
Reboot the system.
•
If the alarm recurs, open a support
case using the Case Manager link
at
http://www.juniper.net/support/
or call 1-888-314-5822 (toll free,
US & Canada)or 1-408-745-9500
(from outside the United States).
Clean up the system file storage
space on the switch. For more
information, see Cleaning Up the
System File Storage Space.
Minor
(yellow)
/var partition usage is
high.
Clean up the system file storage
space on the switch. For more
information, see Cleaning Up the
System File Storage Space.
Major
(red)
/var partition is full.
Use the request system configuration
rescue save command to set the
rescue configuration. For more
information, see Setting or Deleting
the Rescue Configuration (CLI
Procedure).
Minor
(yellow)
Rescue configuration is
not set.
Install the required license for the
feature specified in the alarm. For
moreinformation, see Understanding
Software Licenses for EX Series
Switches.
Minor
(yellow)
Feature usage requires a
license or the license for
the feature usage has
expired.
307Copyright © 2017, Juniper Networks, Inc.
Chapter 29: Alarms and System Log Messages

Juniper EX9208 Specifications

General

Brand	Juniper
Model	EX9208
Category	Switch
Language	English