phosphate, which is very sticky and difficult to clean. In addition, in the presence of minute
amounts of moisture, monoammonium phosphate can become highly corrosive and
corrodes most metals.
Any equipment in a room in which a chemical fire extinguisher has been discharged is
subject to premature failure and unreliable operation. The equipment is considered to
be irreparably damaged.
NOTE: To keep warranties effective, do not use a dry chemical fireextinguisher
to control a fire at or near a Juniper Networks switch or other network device
provided by Juniper. If a dry chemical fire extinguisher is used, the unit is no
longer eligible for coverage under a service agreement.
We recommend that you dispose of any irreparably damaged equipment in an
environmentally responsible manner.
Related
Documentation
• General Safety Guidelines and Warnings on page 317
• General Electrical Safety Guidelines and Warnings on page 349
• Action to Take After an Electrical Accident on page 350
Copyright © 2017, Juniper Networks, Inc.324
EX9208 Switch Hardware Guide
To Next Page
Loading...
Need help?
General
