Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

Table 29: Mapping Bulkstats Output to MIB Flies and CLI Configurations for Policy Schema (continued)
DescriptionCLI ConfigurationMIB Object NameMIB File
Bulkstats Output
Column Name
For packet-oriented
interfaces, the number of
inbound packets that
contained errors preventing
them from being
deliverable to a higher-layer
protocol. For character-
oriented or fixed-length
interfaces, the number of
inbound transmission units
that contained errors
preventing them from
being deliverable to a
higher-layer protocol
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
in-errorsifInErrorsRFC1213ifInErrors
For packet-oriented
interfaces, the number of
packets received via the
interface which were
discarded because of an
unknown or unsupported
protocol. For
character-oriented or
fixed-length interfaces that
support protocol
multiplexing the number of
transmission units received
via the interface which
were discarded because of
an unknown or
unsupported protocol. For
any interface that does not
support protocol
multiplexing, this counter
will always be 0
Discontinuities in the value
of this counter can occur at
re-initialization of the
management system, and
at other times as indicated
by the value of
ifCounterDiscontinuityTime
in-unknown-protosifInUnknownProtosRFC1213ifInUnknownProtos
226 ■ Collecting Bulk Statistics
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English