Chapter 4: Creating and Editing Messages
Linx 4900 Operating Manual 82 MP65492–1
4.13 Creating a Message: Worked
Example
This section provides worked examples that show you how to create the
following example message:
Figure 4-40 Example Message Viewed at the Current Message
Screen
By working through this section, you learn how to:
• Create a 16-drop high message
• Add text, and insert a sell-by date, a batch number and a timed
message
• Print the message
NOTE: The following examples assume that the correct line speed is set
up for your production line. For further information about setting
up the line speed see Chapter 5, ‘Changing the System Setup’.
49107
F1 : Change Message
F3 : New Message
F2 : Check Status
F4 : Change Setup
CURRENT MESSAGE : MESSAGE 1
LINX
Sell by 12 Jun 04
BATCH 9999
Day Shift
4900 Op Manual.book Page 82 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
