Linx 4900 - Printing Performance Data

Appendix F: Technical Specification
MP65492–1 223 Linx 4900 Operating Manual
F.1.8 Printing Performance data
Ultima (62 µm)
Ultima plus (75 µm)
Printhead to Substrate Distance (recommended)
Number of lines of print: Up to two lines of 7 High characters
Number of message types: Up to 9
Maximum speed: 6.25 m/s (one line of 5 High characters)
Minimum character height: 2.2 mm using 5 Wide message type
Maximum character height: 7.4 mm using 16 Wide message type
Number of lines of print: Up to two lines of 7 High characters
Number of message types: Up to 7
Maximum speed: 7.28 m/s (one line of 5 High characters)
Minimum character height: 2.7 mm using 5 Wide message type
Maximum character height: 8.8 mm using 16 Wide message type
Ultima: 12.0 mm
Ultima plus: 12.0 mm
4900 Op Manual.book Page 223 Tuesday, September 9, 2003 12:32 PM