Linx 4900 - To Stop Printing

Chapter 2: Getting Started
MP65492–1 17 Linx 4900 Operating Manual
2.4.3 To Stop Printing
1. Press the [F1] function key:
The message “Stop Print : Please Wait” is displayed briefly in the
Status Line, then printing stops.
Once printing stops:
• The options on the left side of the CURRENT MESSAGE
screen are redisplayed (see Figure 2-6 on page 13)
• The printer status changes to “Jet Running”
• The green Ready LED indicator on the Printer Control Panel
extinguishes
If you want to... Do this...
Restart printing Press the [start] key
View the status of the printer Press the [F2] key
Stop the jet running See the section ‘To Shut Down the
Jet’ on page 21 for instructions
4900 Op Manual.book Page 17 Tuesday, September 9, 2003 12:32 PM