Linx 4900 - Getting Started; Aims; Key Points; Activities

Appendix H: Training Documentation
Linx 4900 Operating Manual 250 MP65492–1
H.3 Getting Started
H.3.1 Aims
• To ensure that there is understanding as to what is required for the
printer to be used on the production line
• To bring the printer to a state where it can be run on line
H.3.2 Key Points
• Powering up the printer
• Using the two power switches
• The keyboard and display
• Using the function keys
• Using the Simply the Linx 4900 pocket guide
• Specific checks relevant to the application (optional)
H.3.3 Activities
Refer to ‘Switching the printer on’ in the Simply the Linx 4900 pocket
guide. Invite the trainees to find the two power switches, to switch the
printer on, and observe the startup (splash) screen.
Explain the CURRENT MESSAGE screen.
Refer to ‘Introducing the printer display’ in the Simply the Linx 4900
pocket guide, and explain the use and location of each of the items in the
display.
Demonstrate the use of the function keys and explain how to access the
printer functions.
4900 Op Manual.book Page 250 Tuesday, September 9, 2003 12:32 PM