Linx 4900 - To Set the Date

Chapter 5: Changing the System Setup
MP65492–1 109 Linx 4900 Operating Manual
5.5.2 To Set the Date
The Set Date option enables you to view and change the current system
date.
Printing must be stopped to change the date.
1. At the CURRENT MESSAGE screen, press the [F4] function key.
The SETUP menu is displayed.
2. Scroll through the menu options until the cursor rests at the Set Date
option, as shown below:
Figure 5-15 Setup Menu: Set Date Option
3. Press the [enter] key.
4. At the Set Date setting, enter the date, in the format dd:mm:yy, by
overtyping.
5. Press the [enter] key to confirm your entry.
6. Press the [esc] key to exit.
Reverse Message
Bold Ratio
Set Time
Set Date
49070
SETUP
: Off
: 1
: 10:16
: 15:08:03
>
4900 Op Manual.book Page 109 Tuesday, September 9, 2003 12:32 PM