Chapter 4: Creating and Editing Messages
Linx 4900 Operating Manual 90 MP65492–1
5. At the TIMED MESSAGE menu, set up the text messages as
follows:
Note that you set up the message with the longest text first—Night
Shift as this sets the length of the field.
To set up Night Shift:
(a) At the Next Message option, press the [enter] key.
(b) At the Time option, press the [enter] key, type in 18:00, then
press the [enter] key.
(c) At the Message option, press the [enter] key, type in Night Shift,
then press the [enter] key.
To type lower-case characters, press and hold the [shift] key.
Now continue to set up Day Shift:
(d) Scroll back up to the Next Message option and press the [enter]
key.
(e) At the Time option, press the [enter] key, type in 08:00, then
press the [enter] key.
(f) At the Message option, press the [enter] key, type in Day Shift,
then press the [enter] key.
6. Press the [F4] key to save the message, create the field and return to
the EDIT MESSAGE screen:
Figure 4-61 Edit Message Screen: Timed Message
4.13.6 To Print the Message
1. Press the [start] key.
The printer starts printing and the CURRENT MESSAGE screen is
displayed showing the message.
Tip
49120
F1 : Size 7 FH (Caps)
F3 : Field Type
F2 : Bold Off
F4 : Save & Exit
EDIT MESSAGE : MESSAGE 1
Sell by dd mmm yy
BATCH 9999
Day Shift
LINX
4900 Op Manual.book Page 90 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
