Linx 4900 User Manual

Appendix D: System Event Messages
Linx 4900 Operating Manual 196 MP65492–1
D.1 System Event Messages
Summary
Figure D-1 System Event Messages Summary Table
49268
SYSTEM EVENT MESSAGES SUMMARY
1. System Failures 2. Print Failures 3. System Warnings
1.00 Internal Failure 2.00 Printhead Over Temperature 3.00 Shutdown Incomplete
1.01 Stack Overflow 2.01 EHT Trip 3.02 Memory Corrupt
1.02 Corrupt Program Data 2.02 Phase Failure 3.03 Ink Low
1.03 Unexpected Interrupt 2.03 Time Of Flight Failure 3.04 Solvent Low
1.04 Unexpected RST 2.04 300V Power Supply 3.05 Over Speed (Print Trigger)
1.05 Unexpected NMI 2.05 Ink Tank Empty 3.06 Over Speed (Synchronous Data)
2.06 Solvent Tank Empty 3.07 Over Speed (Asynchronous Data)
2.07 Internal Spillage 3.11 Scheduled Maintenance Req’d
2.09 Misaligned Ink Jet 3.12 Printhead Cover Off
2.11 Pressure Limit Reached 3.18 Low Pressure
2.12 Viscosity 3.19 Valid UNIC Chip Not Found
2.13 Hardware Safety Trip 3.20 No Time Of Flight
3.26 User Data Corrupt
3.29 No Message Stored
3.30 Message Name Exists
3.31 Message Memory Full
3.32 Remote Error
4900 Op Manual.book Page 196 Tuesday, September 9, 2003 12:32 PM

Linx 4900 Specifications

General

Brand	Linx
Model	4900
Category	Printer
Language	English