Chapter 7: Diagnostics and Maintenance
Linx 4900 Operating Manual 134 MP65492–1
7.2.2 To View the Scheduled Maintenance Interval
The SYSTEM TIMES screen displays valuable information about the
operating times of the printer and the jet, and most importantly, the time
remaining to the next scheduled maintenance.
To view the maintenance interval, do the following:
1. At the CURRENT MESSAGE screen, press the [F4] function key to
display the SETUP menu.
2. Select Diagnostics Menu > System Times.
The following SYSTEM TIMES menu is displayed.
Figure 7-4 System Times Menu
3. Press the [Esc] key to exit from the menu.
This value... Indicates...
Power On The cumulative time, in hours, that the printer
has been running since the last power-on.
Jet Running The cumulative time, in hours, that the jet has
been running since the last power-on.
Service (Hours) The time remaining, in hours, until the next
scheduled maintenance of the printer is due.
Once the time has counted down to zero (0)
hours, the system event message “Scheduled
Maintenance Req’d” is reported, and a minus
(–) sign appears in front of the time.
>
Power On
Jet Running
Service (Hours)
: 75
: 50
: 1350
49012
SYSTEM TIMES
4900 Op Manual.book Page 134 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
