Using this Manual
MP65492–1 (xv) Linx 4900 Operating Manual
Using this Manual
How this Manual is Organized
The manual is structured as follows:
Chapter 1, ‘Introduction’ provides a short introduction to the 4900
printer system, principles of ink jet printing and an overview of the user
interface software.
Chapter 2, ‘Getting Started’ describes how to switch the printer on,
select a message, start and stop the printer, and power it down. It also
introduces you to some fundamental controls and indicators of the 4900
printer system.
Chapter 3, ‘Day-to-Day Operations’ describes the day-to-day printer
operations such as working with the current message, selecting another
message, starting and stopping printing, and checking the printer status.
Chapter 4, ‘Creating and Editing Messages’ describes how to create and
edit messages, including worked examples of how to create a message.
Chapter 5, ‘Changing the System Setup’ describes how to view and to
make changes to the line and installation settings. Instructions on how to
adjust the print parameters and set the time are provided in this chapter.
Chapter 6, ‘Remote Interface Setup’ describes how to define the various
settings to enable the printer to communicate with a remote computer.
Chapter 7, ‘Diagnostics and Maintenance’ describes how to carry out
diagnostic functions such as viewing the jet state and printing a test
message. Also, how to perform routine maintenance, which includes daily
inspections, cleaning the printer cabinet and printhead, replacing or
replenishing ink and solvent, and replacing or cleaning the air filter.
Appendix A, ‘Installation and Setup’ describes how to install and set up
the printer (in case you need to relocate the printer or make changes to
ancillary equipment).
Appendix B, ‘Printer Controls and System Menus’ describes the
General Control keys, keyboard keys, menu functions, and shortcut
accelerator keys.
Appendix C, ‘Line Speeds and Print Quality’ describes how to
determine the ideal production line speed to obtain optimum print quality.
It lists the line speeds for each printer configuration and printhead type.
Appendix D, ‘System Event Messages’ details the 4900 printer system
event messages including the cause and the recommended solution in each
case.
4900 Op Manual.book Page xv Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
Need help?
General
