About this Manual
Linx 4900 Operating Manual (ii) MP65492–1
About this Manual
This manual describes how to operate the Linx 4900 Ink Jet Printer, a
specialist printer system for use in production line environments for
printing onto a wide range of substrates.
The information contained in this edition of the operating manual is
applicable to software Version 1.0.
Products described in this operating manual are subject to continuous
development, and reviews will be made accordingly in subsequent
editions. Linx will be pleased to receive any correspondence relating to this
operating manual and the information contained herein.
For further information or help with Linx products please contact:
Linx Printing Technologies plc
Burrel Road
St Ives
Cambridgeshire
PE27 3LA
UK
Tel: + 44 (0) 1480 302100
Fax: + 44 (0) 1480 302116
E-mail: sales@linx.co.uk
or visit our website at www.linx.co.uk.
Equipment Information
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his own
expense.
WARNING–EN55022: This is a Class A product. In a domestic
environment this product may cause radio interference, in which case the
user may be required to take adequate measures.
4900 Op Manual.book Page ii Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
Need help?
General
