Appendix D: System Event Messages
MP65492–1 195 Linx 4900 Operating Manual
Appendix D: System
Event Messages
This appendix describes the System Event messages for Version 1.0
software of the Linx 4900 printer.
The Linx 4900 printer provides on-screen messages to help you diagnose
problems and, in some cases, take corrective actions before imminent
failure of the system. These messages are known as ‘System Event
messages’.
System Event messages are divided into the following three categories:
• System Failures
Occur when the printer cannot operate due to software failures. These
events are numbered 1.XX.
• Print Failures
Occur when the print cannot continue due to mechanical or electrical
failure. These events cause the printer to shutdown, and are numbered
2.XX.
• System Warnings
Occur when the printer is operated outside specified limits, or when a
failure is imminent. These events are numbered 3.XX.
The printer also displays Advisory Messages. These messages appear
either as a direct response to user commands, for example, “Invalid Data”,
or to inform you of the operational status of the printer (as you work with
the printer, starting and stopping printing, stopping the jet, and so on), for
example, “Starting Jet : Please Wait”.
These messages are not failures or warnings, but are for your information
only. Because these messages are self explanatory, they are not described
in this appendix.
4900 Op Manual.book Page 195 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
