Chapter 5: Changing the System Setup
MP65492–1 91 Linx 4900 Operating Manual
5 Changing the
System Setup
The Linx 4900 printer provides a menu of options that enables you to
change various system settings to your requirements.
From the SETUP menu, you can change the message parameters, line
settings and installation settings if you make any changes to the
configuration of your production line. For example, when you relocate the
printer, or if you wish to change certain system attributes, such as the
passwords, time setting, and system language. You may also wish to adjust
aspects of the printed message by changing the message height or bold
ratio.
This chapter describes how to configure the following:
• Message parameters
• Installation settings
• Line settings
• Passwords
This Setup menu option... Is described in...
Remote Setup Menu options Chapter 6, ‘Remote Interface Setup’
Solvent Add option Chapter 7, ‘Diagnostics and Maintenance’
Ink Type Selection Chapter 7, ‘Diagnostics and Maintenance’
Level B
Level C
See Also
4900 Op Manual.book Page 91 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
