Linx 4900 - Page 107

Chapter 4: Creating and Editing Messages
Linx 4900 Operating Manual 88 MP65492–1
(d) Press the [enter] key.
The SEQUENTIAL NUMBER menu is displayed:
Figure 4-55 Sequential Number Menu
(e) Press the Up [ ] or Down [ ] arrow key to move the menu
cursor to the End Number option (as shown in the example
above), then press the [enter] key.
The cursor moves to the End Number value on the right side of
the screen.
(f) Type in 0000 and press the [enter] key.
The Start Number value defaults to 9999, with a Current
Number of 9999:
Figure 4-56 Sequential Number Menu : Start Number 9999
(g) Press the [esc] key to save and return to the EDIT MESSAGE
screen:
Figure 4-57 Edit Message Screen: Sequential Number
>
49131
SEQUENTIAL NUMBER
Reset Number
Current Number
Start Number
End Number
:
:
:
>
49306
SEQUENTIAL NUMBER
Reset Number
Current Number
Start Number
End Number
: 9999
: 9999
: 0000
49115
F1 : Size 7 FH (Caps)
F3 : Field Type
F2 : Bold Off
F4 : Save & Exit
EDIT MESSAGE : MESSAGE 1
Sell by dd mmm yy
LINX
4900 Op Manual.book Page 88 Tuesday, September 9, 2003 12:32 PM