Chapter 5: Changing the System Setup
Linx 4900 Operating Manual 112 MP65492–1
The Head Height setting range is: +2.0m to –2.0m for 2-metre and
4-metre printhead conduit lengths.
NOTE: Care must be exercised with this option, otherwise poor
printer performance will result if incorrectly set.
5. Press the [enter] key to confirm your entry.
6. Press the [esc] key to exit.
4900 Op Manual.book Page 112 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
