Chapter 7: Diagnostics and Maintenance
MP65492–1 137 Linx 4900 Operating Manual
3. Press the [Esc] key to exit from the screen.
This value... Indicates...
Printhead Ref The reference pressure value as specified in the
printhead code, found on the printhead conduit
label.
Solvent Add The pressure value that the printer uses as a
trigger to add solvent. When the pressure exceeds
this value after the jet/warm-up period solvent is
normally added.
Maximum Run The maximum pressure used by the printer to
establish the jet.
4900 Op Manual.book Page 137 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
