Chapter 4: Creating and Editing Messages
MP65492–1 77 Linx 4900 Operating Manual
5. At the DATE menu, you can specify the offset as follows:
6. Once you press the [enter] key following your Offset value entry, the
EDIT MESSAGE screen is redisplayed, for example:
Figure 4-33 Edit Message Screen: Date Field
NOTE: The actual printed date is not displayed until you have
finished editing the message and returned to the CURRENT
MESSAGE screen.
At this option... You can...
Offset Enter the number of days to be added to the
current date to create the printed date.
NOTE: Remember to press the [enter] key once
you have entered this value.
Format View the date format selected. This is display
only.
If you wish to change the format displayed, press
[esc] to return to the DATE FORMAT menu and
select another format.
49112
F1 : Size 7 FH (Caps)
F3 : Field Type
F2 : Bold Off
F4 : Save & Exit
EDIT MESSAGE : MESSAGE 1
Sell by dd mmm yy
LINX
4900 Op Manual.book Page 77 Tuesday, September 9, 2003 12:32 PM
To Next Page
Loading...
Need help?
General
