215575 291 Revision B
Figure 5.165: Right Front Deck Drive Roller
15. On the right front deck drive roller, tighten locking collar (A)
and two nuts (B).
Figure 5.166: Left Front Deck Drive Roller
16. On the left front deck drive roller, tighten locking collar (A)
and two nuts (B).
17. Recheck the measurements made in Step 13, page 290 to
ensure that the draper belt is still in alignment after
securing the front deck bearings.
18. Tension the draper belt.
19. Reinstall the front hydraulic motor. For instructions, refer
to Installing Front Hydraulic Motor, page 235 .
20. Close the left endshield. For instructions, refer to 3.3.2
Closing Left Endshield, page 26.
MAINTENANCE AND SERVICING
To Next Page
Loading...
