EasyManua.ls Logo

Manitowoc Grove GMK 5250L

Manitowoc Grove GMK 5250L
958 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Malfunctions in driving mode
7.5 Emergency operation and breakdown assistance
7 - 30 3 302 633 en Operating Instructions GMK5250L
27.09.2017
Remember that the steering will be sluggish.
If the engine fails, only the emergency steering pump will be available,
which supports the steering only from a speed of at least 2 km/h (1.2 mph).
Tow the truck crane at a maximum of 10 km/h (6 mph).
Ensure that the towing distance does not exceed 1 km (0.62 mi).
Tow starting It is not possible for the truck crane to start towing for transmission reasons.
7.5.4 Wheel change
If a puncture occurs while driving, stop the truck crane, taking the follow-
ing traffic into account, and secure the truck crane as outlined in the appli-
cable legal stipulations of the country in which you are working.
Select as flat a place as possible to change the wheel.
Apply the parking brake.
G
Risk of accidents due to sluggish steering!
At speeds less than 2 km/h (1.2 mph) the truck crane is barely steerable.
S
Risk of accidents and damage when towing the truck crane long distances!
Tow the truck crane at a maximum speed of 10 km/h (6 mph) and over a dis-
tance of max. 1 km (0.62 mi). Additional measures must be taken for longer
distances, contact
Manitowoc Crane Care.
G
Risk of accidents due to a wheel falling over!
If you temporarily lean a wheel against the truck crane while changing it,
secure it with a rope to prevent it falling over!
Move the outriggers only when no wheel is leaning against the truck crane.

Table of Contents

Other manuals for Manitowoc Grove GMK 5250L

Related product manuals