Driving
5.2 Operating the transmission
Operating Instructions GMK5250L 3 302 633 en 5 - 25
27.09.2017
5.2 Operating the transmission
The transmission automatically controls all gear changes. Despite this,
gears can be changed manually at any time.
5.2.1 Switching on
When the ignition is switched off, the transmission must always be in the
neutral position.
• Shift to position N.
If you switch on the ignition in positions D or R, malfunctions may occur.
• Switch on the ignition.
The electronic gear system is switched on, and a warning buzzer sounds for
several seconds.
To Next Page
Loading...
