Driving
5.4 Off-road driving
Operating Instructions GMK5250L 3 302 633 en 5 - 49
27.09.2017
5.4 Off-road driving
This section describes adjustments, connections and procedures for
adapting the vehicle handling to off-road conditions.
Adjustments to
the transmission
If you drive continuously for short periods of time with different loads or on
a slippery surface, the transmission may switch gears too late or too early.
In this event you can make the following adjustments:
– Shift to a lower starting gear;
à p. 5 - 27.
– Select the
Manual operating mode. This way you will be able to drive care-
fully and shift gears on time;
à Changing the operating mode, p. 5 - 29.
Connections If the adjustments to the transmission are insufficient on their own, you can
additionally connect the following one after the other:
– Then switch on the longitudinal differential lock;
à p. 5 - 50.
– Then switch on the transverse differential lock;
à p. 5 - 50.
Changing the
vehicle level
You can also adapt the truck crane to the off-road inclination using the level
adjustment system, or lift and lower the truck crane;
à p. 5 - 52.
Rocking the
vehicle free
and towing
If the truck crane is stuck in terrain;
à Freeing an immobilized truck crane,
p. 5 - 56.
To Next Page
Loading...
Need help?
General
