Manitowoc Grove GMK 5250L User Manual

Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 20 3 302 633 en Operating Instructions GMK5250L
27.09.2017
4.1.12 Set idling speed
After the engine is started, the idling speed is regulated automatically.
If necessary, you can adjust the idling speed manually.
H
You can only set the idling speed when the truck crane is stationary.
Increasing/reducing the idling speed
• Press the button (1) repeatedly until Engine
speed
is shown in the on-board computer
display.
• Increase or decrease the speed stepwise
using the buttons (2) or (3). The engine
speed is increased/reduced by 20 rpm.
After approx. 3 seconds the setting is
automatically saved.
Switching off the idling speed change
• Press the button (1) repeatedly until Engine
speed
is shown in the on-board computer
display.
• Press the button (3).
or
• Press the button (2).
or
• Accelerate over 20 km/h (12 mph).

Manitowoc Grove GMK 5250L Specifications

General

Brand	Manitowoc
Model	Grove GMK 5250L
Category	Construction Equipment
Language	English