Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
Operating Instructions GMK5250L 3 302 633 en 4 - 11
27.09.2017
Battery master
switch
You can only start the engine when the battery master switch is switched
on.
• Switch on the battery master switch (1).
Checking the
hand-held control
Check that the hand-held control has been removed, and that bridging plugs
for the hand-held control are inserted into all sockets;
à p. 3 - 41.
4.1.6 Switch on the ignition
H
The ignition can only be switched on if the bridging plugs have been
inserted in all sockets for the hand-held control;
à Sockets for hand-held
control
, p. 3 - 41.
• Insert the ignition key into the ignition lock and turn the key to position 2.
After the ignition has been switched on:
– the CCS control unit is switched, but the start menu is not displayed until
– a lamp test has been performed,
– the switching states have been checked.
H
Do not start the engine until the start menu appears on the CCS control unit.
To Next Page
Loading...
Need help?
General
