EasyManua.ls Logo

Manitowoc Grove GMK 5250L

Manitowoc Grove GMK 5250L
958 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rigging work
11.11 Other rigging work
Operating Instructions GMK5250L 3 302 633 en 11 - 129
27.09.2017
11.11 Other rigging work
11.11.1 Railings on the turntable
The turntable is equipped with fixed handrails or extendable/retractable
handrails, depending on the version.
Always extend the handrails when you are working above on the turntable.
Always retract the handrails before driving.
(A) – Sliding out
Open the locking bolt (2).
Extend the handrail (1) upwards until the
bolt (2) latches into place.
(B) – Pushing in
Open the locking bolt (2).
Retract the handrail (1) until the bolt (2)
latches into place.
s
G
Risk of accidents if railings are not pushed out!
The railings provide protection from falling. Always fold out the railings
before moving onto the auxiliary hoist.
G
Risk of accidents due to exceeding the permissible dimensions!
Retract the handrails before driving. When the railing is pushed out, the
overall height specified for on-road driving is exceeded.

Table of Contents

Other manuals for Manitowoc Grove GMK 5250L

Related product manuals