Driving modes and rigging for on-road driving
6.6 Rigging the auxiliary hoist
Operating Instructions GMK5250L 3 302 633 en 6 - 67
27.09.2017
6.6.11 Transporting the auxiliary hoist
•
For transportation, be sure to use a separate vehicle with sufficient load
bearing capacity. Transport dimensions and weight;
à p. 1 - 10.
• Load the separate vehicle in such a way that the weight is evenly
distributed.
• Transport and secure the auxiliary hoist in such a way that traffic is not
put at risk.
• Lift the auxiliary hoist onto the separate
vehicle and remove the lifting gear.
• Secure the hoses, e.g. on the slinging
point (3).
• The plug (2) must be inserted in the dummy
socket.
• The hoist rope is secured on the clamp (1).
To Next Page
Loading...
