Driving modes and rigging for on-road driving
6.5 Installing/removing the outrigger beams
6 - 54 3 302 633 en Operating Instructions GMK5250L
27.09.2017
6.5.13 Note on error messages with removed outrigger beams
After removing the outrigger beams the error messages listed here occur.
The error messages indicate only that the electrical connection between the
outrigger beams and the crane control is disconnected. They have no
further effect on the crane operation and driving operation.
In crane operation
After an RCL code (1006, 1066, 1076) for rigging the outrigger beams has
been entered, the error messages are automatically deactivated.
In driving operation
The error messages are displayed in the driver's cab on the
CCS display
until the outrigger beams are reinstalled.
5801.7.33.2 5809.7.32.96 5801.7.33.98
5803.7.32.2 5807.7.32.96 5803.7.32.98
To Next Page
Loading...
Need help?
General
