Starting/switching off the engine – for crane operation
9.1 When starting the engine for the first time in the day
Operating Instructions GMK5250L 3 302 633 en 9 - 5
27.09.2017
9.1.4 Display – setting the brightness
•
Open the Settings menu (1).
This is operated in the same way as in the driver's cab;
à p. 4 - 13.
9.1.5 Start the engine
This section relates to starting a warm and cold engine.
• Do not press the accelerator.
• Turn the ignition key to position 1.
• Press the button (1) in at the top.
• Let go of the button after the engine starts.
After starting, the idling speed corresponds to the standard value.
If the engine does not start, release the ignition key after approx. 15 seconds
and wait one minute before trying again.
H
To set the idling speed; Ã p. 9 - 7.
If the engine does not start after multiple attempts;
à Malfunctions on the
engine
, p. 7 - 17.
S
Danger of explosion when using starter fuel!
The engine may never be started with the aid of starter fuel. Starter fuel
sprayed into the suction unit can ignite.
To Next Page
Loading...
Need help?
General
