Driving modes and rigging for on-road driving
6.6 Rigging the auxiliary hoist
6 - 60 3 302 633 en Operating Instructions GMK5250L
27.09.2017
6.6.5 Lowering/raising the rigging frame
Prerequisite – A minimum of the 7 t base plate lies on the counterweight platform,
– A maximum counterweight combination of 21 t lies on the counterweight
platform.
(A) – Setting down
• Lift the rigging frame (1) onto the counter-
weight combination.
(B) – Lifting
The auxiliary hoist must be removed.
• Sling the rigging frame (1).
• Lift the rigging frame (1) from the counter-
weight combination.
6.6.6 Placing the auxiliary hoist on the counterweight combination
• Lift the auxiliary hoist
–(A) onto the counterweight combination
or
–(B) onto the rigging frame.
The pins (1) must fit into the mountings (2).
• Remove the lifting gear.
• Establish the connections to the turntable:
–
à Establishing/disconnecting the hydraulic
connection
, p. 6 - 61,
–
à Establishing/disconnecting the electrical
connection
, p. 6 - 62,
–
à Creating the connection to the turntable,
p. 6 - 63.
To Next Page
Loading...
