Driving modes and rigging for on-road driving
6.1 Driving modes
6 - 2 3 302 633 en Operating Instructions GMK5250L
27.09.2017
6.1.1 How to use the tables
The tables consist of two parts:
– The driving mode of your truck crane is specified in the top part, next to
Equipment. Find out which driving mode applies to your truck crane.
Each truck crane has one driving mode only.
– The required rigging mode for this driving mode and the accessories
you are allowed to transport are specified in the lower section, next to
Rigging mode.
Example of how to use the table:
Your truck crane is delivered with 385/95 R 25 tyres, aluminium rims, the
10 x 8 x10 drive and a towbar.
In this case, the driving mode in the upper part, in addition to the equipment, is 5.
According to the specifications in the lower part, in addition to rigging mode,
– the hook tackle must be hung on the bumper,
– the hose drum with attached parts must be mounted on the swing-away lattice,
– the storage compartment with 200 kg accessories must not be mounted at the
rear.
To Next Page
Loading...
Need help?
General
