Starting the engine for driving / switching it off
4.2 Switching off the engine
Operating Instructions GMK5250L 3 302 633 en 4 - 21
27.09.2017
4.2 Switching off the engine
4.2.1 On the ignition lock/with hand-held control/on the outrigger
control units
If the temperature of the coolant is very high, let the engine run on for
another one or two minutes at increased idling speed.
If the hand-held control is not connected:
• Turn the ignition key to position 0 – the engine will stop.
If the hand-held control is connected:
• Press the button (1) – the engine will switch off.
It is not possible to switch off the engine with the ignition lock
On the outrigger control units, if the hand-held control is not connected:
• Press the button (1) – the engine will switch off.
After turning off If you want to park the truck crane;
à p. 5 - 46.
G
Risk of accidents because the truck crane cannot be steered!
Switch the engine off only once the truck crane has come to a standstill.
If you remove the ignition key, the steering will lock and you will lose
control of the moving truck crane.
To Next Page
Loading...
Need help?
General
