Driving with a rigged truck crane
12.3 Before driving
Operating Instructions GMK5250L 3 302 633 en 12 - 5
27.09.2017
12.3.2 Checking the tyre pressures and wind speed
•
Ensure that all the tyres are at the prescribed pressure levels;
à Tyres, p. 1 - 16.
The same maximum permissible wind speeds for working with the crane
apply to driving the truck crane.
• Check the wind speed; à p. 10 - 74.
S
Risk of damage to the tyres!
You may only drive the truck crane if the tyres are at the prescribed
pressure level.
Never reduce the tyre pressure in order to increase the bearing surface of
the tyres!
G
Risk of accidents due to excessively high wind speeds!
You may not drive the rigged truck crane if the wind speed exceeds the
maximum permissible values specified in the
lifting capacity table. In this
case, you must bring the truck crane into a secure state.
To Next Page
Loading...
Need help?
General
