EasyManuals Logo

Manitowoc Grove GMK 5250L User Manual

Manitowoc Grove GMK 5250L
958 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #259 background imageLoading...
Page #259 background image
Driving
5.5 Separate steering
Operating Instructions GMK5250L 3 302 633 en 5 - 59
27.09.2017
5.5 Separate steering
There are two steering modes with separate steering.
– Driving around corners:
When the separate steering is switched on, the steering angle is larger
than for normal steering mode – the turning circle is smaller.
– Crab travel mode:
When the separate steering is switched on, the truck crane drives side-
ways if you turn the wheels of the front and rear axle lines in the same
direction.
5.5.1 Switching to separate steering
Always switch to separate steering when
– driving with the truck crane rigged or
– steering at low speed.
You can only change over to separate steering when the current speed is
below approx. 5 km/h (3 mph).
s
G
Risk of accidents when driving on-road with unlocked steering!
After driving with separate steering, change over immediately to normal
steering mode. The locking status for normal steering mode is only
restored once the on-road driving symbol is displayed.

Table of Contents

Other manuals for Manitowoc Grove GMK 5250L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Grove GMK 5250L and is the answer not in the manual?

Manitowoc Grove GMK 5250L Specifications

General IconGeneral
BrandManitowoc
ModelGrove GMK 5250L
CategoryConstruction Equipment
LanguageEnglish

Related product manuals