Starting/switching off the engine – for crane operation
9.1 When starting the engine for the first time in the day
Operating Instructions GMK5250L 3 302 633 en 9 - 3
27.09.2017
9.1.2 Checks before starting the engine
At the hydraulic
tank
The valve on the hydraulic tank must be open before starting the engine.
• Check that the valve is open – lever (1)
parallel to the pipe.
• Open the closed valve.
s
S
Risk of damage to the hydraulic pumps!
You may only start the engine when the valve on the hydraulic tank is open!