Operating elements for crane operation
8.2 Brief description of the operating elements
8 - 126 3 302 633 en Operating Instructions GMK5250L
27.09.2017
House lock on/off
8.2.22 Remote control
H
Operating with the remote control is only enabled for the Standard slewing
range type.
Remote control menu
Remote control display
To switch on: Symbol (1) – Pin extends
To switch off: Symbol (2) – Pin retracts
à p. 10 - 17
1–Orange:
Remote control connected
1–Green:
Remote control switched on.
CCS operation from the cab is blocked.
Symbol (2) is shown green on all
menus.
1–Off:
Remote control deactivated
For more information;
à Separate operating
instructions
1–Green:
Remote control switched on.
CCS operation from the cab is blocked.
Symbol (2) is shown on all menus.
1–Off:
Remote control deactivated
For more information;
à Separate operating
instructions
To Next Page
Loading...
