Operating elements for driving
3.2 Brief description of the operating elements
Operating Instructions GMK5250L 3 302 633 en 3 - 53
27.09.2017
3.2.8 Transmission
à Operating the transmission, p. 5 - 25.
Transmission
control unit
Selecting the transmission mode
The engine must be running.
s
– Position N: Select neutral – No gear engaged
– Position D: When at a standstill – Select forwards starting gear
When driving forwards – Select a suitable gear,
clutch engages
When driving in reverse – Select neutral position
– Position R: When at a standstill – Select reverse starting gear
When driving in reverse – No gear change
When driving forwards – Select neutral position
To Next Page
Loading...
