Driving
5.1 Before driving
5 - 12 3 302 633 en Operating Instructions GMK5250L
27.09.2017
5.1.3 Adjusting the seats and steering column
Driver's seat The seat height and lumbar support are adjusted pneumatically. You can
only make these adjustments when:
– the switch (1) on the driver's seat is switched off (not pressed in),
– sufficient air pressure is available in the secondary consumer circuit.
You may have to build up supply pressure;
à p. 5 - 10.
• Sit on the driver's seat; the seat will rise to the last position set.
You can make adjustments to suit your body size and shape.
Settings for body size
1 Seat heating on/off
1)
2 Back rest – angle
3 Seat – longitudinal adjustment
4 Seat – height
5 Adjust suspension stiffness to body
weight
1)
Additional equipment
To Next Page
Loading...
