Basic safety instructions
2.2 Organisational measures
Operating Instructions GMK5250L 3 302 633 en 2 - 3
27.09.2017
2.2 Organisational measures
The operating manual and the lifting capacity table should be kept in the
truck crane for immediate access at all times, and must not be removed
from the truck crane. You must have read and understood the operation and
safety instructions in this operating manual and comply with them when
working.
In addition to the operating manual and the lifting capacity table, observe
all general, statutory and otherwise applicable regulations concerning acci-
dent prevention and environmental protection. You must have read and
understood these and observe them when operating the crane and driving.
They could include:
– How to deal with hazardous materials,
– The wearing of personal protective equipment,
– Road traffic regulations and
– all applicable regulations concerning the operation of a crane.
Make sure that persons who will work on the truck crane are provided with
the required information prior to starting operations. Instruct your person-
nel (e.g. banksmen, slingers, rigging personnel) accordingly.
Make sure the maintenance personnel have the necessary expertise for safe
crane operation. Make sure the maintenance personnel have access to the
operating manual.
Only qualified or trained personnel may carry out work on the truck crane.
Responsibilities regarding the operation of the crane, rigging, maintenance
and repair work must be clearly defined.
Make sure only authorised personnel carry out work on the truck crane.
Do not leave long hair untied and do not wear loose clothing or jewellery
(including rings) during work. They could get caught or pulled in and cause
injuries.
Use your personal protective gear whenever necessary or prescribed.
Observe all safety instructions and warnings on the truck crane.
Keep all safety instructions and warnings on the truck crane in a legible
condition.
s
To Next Page
Loading...
Need help?
General
