Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
Operating Instructions GMK5250L 3 302 633 en 4 - 1
27.09.2017
4 Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
This section describes how to start the engine from within the driver's cab.
You can also start the engine using the hand-held control, or from the crane
cab;
à Starting the engine for driving for rigging work, p. 11 - 23.
4.1.1 CHECKLIST: Starting the engine
H
This checklist is not a complete operating manual. There are accompanying
instructions, which are indicated by cross-references.
Observe the warnings and safety instructions there!
1. Check that the valves on the hydraulic tank are open;
à p. 4 - 10.
2. Check the coolant level in the engine;
à Maintenance Manual.
3. Check the oil level in the hydraulic system;
à Maintenance Manual.
s
To Next Page
Loading...
Need help?
General
