Starting the engine for driving / switching it off
4.1 Starting the engine from the driver's cab
4 - 2 3 302 633 en Operating Instructions GMK5250L
27.09.2017
4. Switch on the battery master switch; Ã p. 4 - 11.
5. Check that
– The bridging plugs are inserted in the sockets for hand-held control;
à p. 9 - 4.
– All emergency stop switches have been reset;
à p. 4 - 22.
6. Check the oil level in the engine and transmission;
à Maintenance
Manual
.
7. Check that the parking brake is engaged.
8. Switch on the ignition and check the instruments and displays;
à p. 4 - 11.
9. Adjust the brightness of the
CCS display if necessary; Ã p. 4 - 13.
To Next Page
Loading...
Need help?
General
