Starting/switching off the engine – for crane operation
9.1 When starting the engine for the first time in the day
9 - 6 3 302 633 en Operating Instructions GMK5250L
27.09.2017
9.1.6 Inspections after starting the engine
• Check the display (1) on the CCS control unit
immediately after starting the engine.
When a symbol is displayed in the display
area (1);
à Malfunctions on the engine,
p. 7 - 17.
• Also check the displays
1 Engine speed display
in rpm
2 AdBlue (DEF) filling level indicator
in percent
3 Coolant temperature display
in °C (°F)
4 Fuel level display
in percent
5 Voltage monitoring display
in Volts
6 Hydraulic oil temperature display
in °C (°F)
To Next Page
Loading...
Need help?
General
