306 Matrix PRASAR UCS System Manual
Configuring Any Standard SIP Phone
You are recommended to complete the following steps before connecting Any Standard SIP Phone:
• Decide the physical location of the Standard SIP Phone.
• Configure the settings in the third party DHCP Server. For instructions, see “Using any third party DHCP
Server in your LAN”.
• Configure the SIP Extension Settings in PRASAR UCS. For details, see “Configuring SIP Extension
Settings using Jeeves”
61
.
• Configure the device specific settings applicable to your Standard SIP Phone at any one of the Location 1,
2 or 3 on the SIP Extensions page. To do so,
• Under Configuration, click VoIP Configuration.
• Click SIP Extension Settings.
• Click Location 1 and configure the following parameters.
b. If you want to apply the rules of the Dial Plan configured in PRASAR UCS, see “Dial Plan for SIP Extension”.
You can also configure rules for the Dial Plan from each phone. To do so, refer to the SPARSH VP710 User
Guide.
c. If an option other than "Do not send" is selected in Local Phone Book, it will overwrite all Local Phone Book's
contacts of the phone.
d. To avoid unauthorized access, we recommend you to change the User Password regularly. Make sure it is
strong and is kept confidential.
e. To avoid unauthorized access, we recommend you to change the Admin Password regularly. Make sure it is
strong and is kept confidential.
61. Some of the features may not be supported depending on the Standard SIP Phone you have connected. Please refer the specific
Standard SIP Phone manufacturer’s documentation for more details.
Parameter Description/Action to be Taken
Applicable Standard SIP
Phone Variant
Enable Device Select the Enable Device check box. Default: Disabled. Any Standard SIP Phone
Location Name
Configure the Location Name to identify the Standard SIP
Phone. The Location Name can be a maximum of 18
characters. Default: Blank.
Any Standard SIP Phone
Device Type Select Device Type as Any Standard SIP Phone. Any Standard SIP Phone
MAC Address
Enter the MAC Address of the Standard SIP phone to be
connected at this location. Default: Blank.
PRASAR UCS validates the phone on the basis of the MAC
Address, and provides configuration on validation.
Any Standard SIP Phone
Standard SIP
Authorization
Profile
Select the desired Standard SIP Authorization Profile from
the list of profiles. Default: None.
Any Standard SIP Phone
To Next Page
Loading...