INSTALLATION - ALPHA ONE DRIVES - 2A-790-823225--1 1096
2 BARREL CARBURETOR
72013
b
c
d
a
d
b
a - Cable End Guide
b - Attaching Hardware
c - Cable Barrel
d - Anchor Studs
4 BARREL CARBURETOR
72014
b
a
c
d
b
b
d
a - Cable End Guide
b - Attaching Hardware
c - Cable Barrel
d - Anchor Studs
d. Place remote control throttle lever in the
wide-open-throttle (W.O.T.) position. Check
to ensure that throttle shutters (valves) are
completely open and throttle shaft lever con-
tacts carburetor body casting.
THROTTLE BODY FUEL INJECTION
71711
a
b
c
a - Flat Washer and Locknut - Tighten Until Nut Bottoms Out,
Then Back Off 1/2 Turn.
b - Cable Barrel
c - Flat Washer And Locknut
e. Return remote control throttle lever to idle po-
sition and check to ensure that throttle lever
contacts idle speed adjustment screw.
MERCARB 2 BARREL CARBURETOR
72283
b
c
a
W.O.
T.
IDLE
a - Throttle Lever Tang
b - Carburetor Body
c - Idle RPM Adjustment Screw
To Next Page
Loading...
