Minebea Intec X3 - Page 24

3.4.3.2 Instrument display
6‑digit weight values (digit height 18 mm) with the decimal points can be shown on the
display.
No. Description
1 Weight type/plus or minus sign/standstill
2 Symbols/mass unit
3 Weight value
Weight type/plus or minus sign Description
Gross weight
Gross weight in NTEP or NSC mode
Net weight (Net = gross - tare)
Tare weight
Preset tare
No display - Test value
- Gross, not tared
The weight display shows the test value without
mass unit.
Positive value
Negative value
X3 Process Indicator PR 5410 3 Device description
EN-22 Minebea Intec