Minebea Intec X3 User Manual

Alphanumeric keypad
Pressing once displays the corresponding first character, e.g.,"A",
at the cursor position. After pressing twice, "B" is displayed at the
cursor position and after pressing three times, "C" is displayed.
Press the cursor key to finish entering a character or wait
approx. 2 seconds.
If only numeric values are required for input, letters are not enab-
led.
Press the
cursor key within an entry to return to the previous
character.
Press the cursor key within an entry to select the next charac-
ter.
Within an input, pressing the delete key deletes the character
to the left of the cursor.
Input field
In principle
If alphanumeric characters are already present in the input field of
the selected line, they will be completely overwritten after imme-
diate entry.
If alphanumeric characters are already present in the input field of
the selected line, you can press the
cursor key to select the
characters to be overwritten and overwrite them.
3.4.4.2 Operation using softkeys
The functions of the five softkeys below the graphic display are indicated in the
bottommost text line of the display. Softkey functions shown in gray cannot be selected
at the active menu level or with the current access privileges.
3 Device description X3 Process Indicator PR 5410
Minebea Intec EN-25

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English